久久99精品国产麻豆不卡_末成年女av片一区二区_久久精品免费一区二区喷潮_精品久久久久久久久午夜福利_麻豆亚洲av熟女国产一区二

歡迎訪問濟南立強模具有限公司!

當前位置:首頁-新聞中心-公司新聞注塑加工中常用的材料有幾種

注塑加工中常用的材料有幾種

來源:http://www.henghaihr.com/ 日期:2022-08-27

我們生活中見到的塑料制品大部分是通過注塑加工來完成的。不同產品使用的材料不一樣,那么,注塑加工中我們用到的材料一般有哪些呢?下面,濟南注塑加工小編將作一下分享。
Most of the plastic products we see in our life are completed by injection molding. Different products use different materials, so what are the materials we use in injection molding? Next, Jinan injection molding processing editor will share.
1、聚苯乙烯(PS)。俗稱硬膠,是一種無色,透明,光澤的粒狀物。
1. Polystyrene (PS). Commonly known as hard glue, it is a colorless, transparent and glossy granular material.
2、聚丙烯(PP)。是無色透明或有一定光澤的粒狀料,簡稱PP,俗稱百折軟膠。是一種結晶性塑料。
2. Polypropylene (PP). It is a colorless, transparent or glossy granular material, referred to as PP, commonly known as hundred fold soft glue. It is a crystalline plastic.
濟南注塑加工
3、尼龍(PA)。是一種工程塑膠,是由聚酰胺類樹脂構成的塑料,簡稱PA.有PA6 PA66 PA610 PA1010等。
3. Nylon (PA). It is a kind of engineering plastic, which is made of polyamide resin, referred to as PA PA6, PA66, PA610, PA1010, etc.
4、聚甲醛(POM)。又稱賽鋼料,是一種工程塑膠。
4. Polyoxymethylene (POM). Also known as saigang material, it is an engineering plastic.
5、ABS (丙烯月青-丁二烯-苯乙烯)。ABS塑料屬于一種高強度改性聚苯乙烯,由丙烯腈,丁二烯和苯乙烯三種化合物以一定配比組成,帶淺象牙色,不透明,無味。
5. ABS (propylene cyanine butadiene styrene). ABS plastic is a kind of high-strength modified polystyrene, which is composed of acrylonitrile, butadiene and styrene in a certain proportion. It is light ivory colored, opaque, non-toxic and tasteless.
6、PC(聚碳酸酯)。俗稱防彈玻璃,是一種,無味,無臭,透明的材料,有可燃性,但離火后能自熄。
6. PC (polycarbonate). Commonly known as bulletproof glass, it is a non-toxic, tasteless, odorless, transparent material with flammability, but can self extinguish after leaving the fire.
7、PC+ABS(PC+ABS 合金)。綜合了PC(工程塑膠) 與ABS(通用塑膠)兩者優點,改進了兩者性能.含ABS 及PC 化學成分,具ABS好的流動性及成型加工性能, PC抗沖擊及耐冷熱循環變化。
7. PC + ABS (PC + ABS alloy). It combines the advantages of PC (engineering plastics) and ABS (general plastics) and improves their performance Containing ABS and PC chemical components, it has good fluidity and molding processing performance of ABS, and PC is resistant to impact and cold and hot cycle changes.
上面就是注塑加工常用到的一些材料了。如果您喜歡小編的分享,歡迎關注我們http://www.henghaihr.com,我們將為您竭誠進行服務!
Above are some materials commonly used in injection molding. If you like Xiaobian's sharing, please follow us http://www.henghaihr.com Yes, we will serve you wholeheartedly!

相關產品 / Related products

濟南立強模具有限公司

魯ICP備15002024號-2

網站地圖    TXT    XML 魯公網安備 37010502002026號